TPO Roofing

The TPO Advantage: Why Orlando Businesses are “Going White”

If you look at the roofs near the Orlando International Airport or the big warehouses in Lake Nona, you will see a sea of white. This isn’t just for the aesthetic. It’s a survival strategy.

Save Money on Every Power Bill

TPO is a “Cool Roof.” The bright white surface reflects up to 80% of the sun’s heat back into the sky. For a large building in Orlando, switching to a TPO roof can drop your cooling costs by 20% to 30%. That is thousands of dollars back in your pocket every year.

How TPO Roofing Works: Engineering Built for the Sun

Not all flat roofs are the same. TPO is a single-ply, reflective sheet made of three strong layers:

• The Base: The bottom layer that stays flexible.
• The Scrim: The “heart” of the roof that makes it very hard to rip or puncture.
• The Top Layer: The tough white skin that fights off UV rays and weather.

The Magic of Heat-Welded Seams

The biggest problem with flat roofs is the “seams” (where the sheets meet). Old roofs use glue or tape that dries out and leaks in the typical Orlando humidity. TPO is different. We use a robotic tool to melt the sheets together at over 800°F. This creates one single, waterproof skin that is actually stronger than the material itself!

Where TPO Works Best: From Warehouses to Modern Homes

TPO is strong enough for a giant warehouse but looks clean enough for a fancy shop in Winter Park.

Industrial & Retail Spaces: TPO is very tough against chemicals and oils. Whether you run a restaurant or a factory, TPO stands up to the stuff that would melt a regular asphalt roof.

Modern Homes (Residential TPO): We are seeing a big move toward TPO for houses, too. Modern homes and new additions in College Park look great with TPO. It stays much cooler than old “gravel” or “torch-down” roofs.

TPO Maintenance: Keeping Your Flat Roof Safe

TPO is easy to care for, but in Florida, you still have to pay attention. The big storms that hit Orlando every afternoon can bring dirt and leaves that block your drains.

Our “OnPoint” Care Strategy

• Twice-a-Year Checks: We check the seams and the areas around your AC units.
• Clear the Drains: We make sure water doesn’t “pond” (puddle). Standing water is the enemy of any flat roof.
• Fast Fixes: If an AC worker drops a tool and pokes a hole, we can “weld” a patch in just a few minutes.

TPO vs. PVC vs. EPDM: The Best Choice for Your Building

In Orlando, you will hear these three names a lot:

• EPDM: This is black rubber. It soaks up heat like a sponge. In Florida, that is usually a bad idea.
• PVC: Very similar to TPO. It is great for greasy roofs (like over a kitchen), but it costs a lot more.
• TPO: The “Sweet Spot.” It reflects heat just as well as PVC but costs much less. It is the best choice for most business budgets.

Frequently Asked Questions (FAQ)

How long does a TPO roof last in Orlando?

A good TPO roof usually lasts 20 to 30 years. We recommend a “60-mil” or “80-mil” thickness to handle the Florida sun.

Can you put TPO over my old roof?

Often, yes! If your old roof is dry and strong, we can do a “recover.” This saves you the huge cost of tearing the old roof off.

Is TPO slippery when it’s wet?

Yes. Like any flat roof, it can be slick in a rainstorm. We install “walkway pads” near your AC units to keep your workers safe.

Does a white roof get dirty?

Over time, dust and algae can grow. It won’t hurt the roof, but it might not reflect the sun as well. We offer “soft-wash” cleaning to keep it working at 100%.

Can TPO handle Florida hail?

Yes. TPO is very flexible. For areas that get hit with big hail, we recommend the thicker “80-mil” version for extra protection.

Does TPO have a warranty?

Yes! We offer warranties that cover your building for 20 years or more.

How much does TPO cost?

Price depends on the size of the building, but TPO is almost always the best value for a “Cool Roof” in Orlando.

Can I put solar panels on a TPO roof?

Yes! In fact, solar panels work better on TPO because the white roof keeps them cool.